2015 Chrysler 200 3.6L PCM | Engine Computer ECM ECU Programmed Plug&Play (2023)

Description

This Engine Computer also referred to as an Engine Control Module (ECM), Engine Control Unit (ECU) & Powertrain Control Module (PCM) is a guaranteed replacement for all 2015 Chrysler 200 PCM models with a 3.6L engine size. The following part numbers are compatible with this unit:

05150925AA, 05150925AB, 68102892AE, 68102892AF, 68102892AG, 68102892AH, 68102892AI, 68102892AJ, 68102892AK, 68102892AL, 68102893AE, 68102893AF, 68102893AG, 68102893AH, 68102893AI, 68102893AJ, 68102893AK, 68102893AL, 68102894AB, 68102894AD, 68102894AE, 68102894AF, 68102894AG, 68102894AH, 68102894AI, 68102895AB, 68102895AD, 68102895AE, 68102895AF, 68102895AG, 68102895AH & 68102895AI

Our 2015 Chrysler 200 ECM will arrive Programmed & Updated to your vehicle's VIN (Vehicle Identification Number). The unit will be Plug and Play with no additional programming required.

NOTE: We will need your Vehicle Identification Number (VIN) in order to program the unit.

During the checkout process, please enter it in the text field labeled "Vehicle Identification Number (VIN)" located in the Vehicle Information section.

*Don't have your VIN number on hand? Not a problem, you can send it to us later by e-mail admin@fs1inc.com or by phone 516-766-2223 (EXT 2)

REFURBISHED AND QUALITY CONTROL TESTING:

Each unit is prepared, individually inspected, fully refurbished, and quality control tested by our certified in-house mechanics. All testing and refurbishing is done entirely in house so no unit leaves our facility without proper inspection. This allows us to provide units that are superior in quality at an unbeatable price! All units are tested to ensure they address all common Chrysler 200 PCM issues including:

  • Electrical Problems
  • Failure to Start
  • Fault/Trouble Codes
  • Intermittent Problems
  • Loss of Power
  • No Ignition Pulse
  • No Injector Pulse
  • Poor Fuel Economy
  • Shifting Problems

Why Purchase From Us:

  • Industries Lowest Prices
  • FREE Lifetime Warranty
  • FREE Domestic Shipping with Quick Turnaround Time
  • No Core Charge or Core Return Required; you can keep your old unit
  • Guaranteed OEM products; Refurbished and 100% Tested
  • Latest Software Updates Included
  • Plug & Play; No Additional Programming Required
  • ASE Certified In-House Technicians
  • Readily Available Support Agents (email, phone, live chat)
  • Google Verified Merchant, 1500+ 5-Star Reviews ★ ★ ★ ★ ★
(Video) SYMPTOMS OF A BAD ECM (ENGINE CONTROL MODULE)

Additional Information

More Information
SKUGL-6223
ConditionRefurbished
Year2015
MakeChrysler
Model200
Engine Size3.6L
TransmissionAutomatic
Emissions50 State
Module TypeGPEC ? GYBR
Hardware Code05150925AA & 05150925AB
Keys AvailableNo

Shipping & Cancellation

Shipping Rates
Shipping Destination Flat Rates Duration of Shipping
Africa, Central & South America $225.00 USD 2-8 Business Days
Asia, Australia & Europe $150.00 USD 2-8 Business Days
Canada $70.00 USD 2-8 Business Days
Caribbean $112.50 USD 2-8 Business Days
Mexico $150.00 USD 2-8 Business Days
USA Free Shipping 2-7 Business Days
  • All items have a 1-3 full business day (Mon. - Fri. excluding holidays) handling time after the order is fully processed for refurbishing/programming unless otherwise expressly stated.
  • Upon completion of refurbishing/programming, your item will be shipped using USPS Priority Mail unless an upgraded method of shipment is purchased.
  • All units which finalize refurbishing/programming BEFORE 3:00 p.m. EST, will be shipped that same day.
  • All units which finalize refurbishing/programming AFTER 3:00 p.m. EST, will be shipped the following business day.
  • Shipping times within the country vary but are generally between 1-3 shipping days (Mon. - Sat. excluding holidays). Customers will be notified of any delay via email.

Returns/Warranty: T&C

All items come with a lifetime warranty. Warranty does not include any labor associated with installation and/or removal of parts, key and/or Locksmith fees. Buyer will not be reimbursed for any such fees--NO EXCEPTIONS. Buyer hereby acknowledges and agrees that the Seller's liability is limited to the price of the item sold and Seller is not liable for any damage and/or injury sustained that results from any item(s) sold by any entity operated by Flagship One, Inc and Buyer hereby now and forever relinquishes Seller from any such liability. Returns must be in original condition and be accompanied by a Return Merchandise Authorization (RMA) otherwise the return will be deemed unauthorized. Unauthorized returns will not be processed and will be held for no more than 45 days after receipt. After 45 days, if an unauthorized return is not claimed or accompanied by an RMA, Seller reserves the right to maintain possession of the unclaimed/unauthorized return. Electrical parts are tested prior to purchase and if returned, all units will be inspected for burnt components, physical damage and water damage. Returns will be processed in the order received and may have a greater handling time than order processing. The lifetime warranty shall be void if an item is returned with any signs of: (a)burnt components; (b)physical and/or water damage; (c)misuse, abuse, modifications, opened, tampered with, and/or used for any purpose not originally intended; (d)vehicle is involved in a collision; or (e)security seal is removed, broken and/or damaged. Buyer must activate warranty within 20 days of receipt to be valid. Returns are subject to a 20% restocking fee. Returned programmed items are subject to an additional $85 non-refundable programming fee and, if Buyer purchased keys, the return is subject to an additional $90 non-refundable key fee.

All returns for money back must be received by Seller within 30 days from the date of original purchase—NO EXCEPTIONS. Returns received after 30 days from the date of original purchase include an option for an exchange or in-store credit. Unless otherwise expressly provided, in-store credit is subject to the return fees when the unit is free of defect which shall be determined solely by Seller. Seller expressly reserves the right to require a Buyer to return an alleged faulty/defective unit to Seller at the Buyer's expense for testing prior to replacement. NO replacement shall be issued until receipt of return. All items are OEM/Refurbished and Seller will NOT reimburse any fees a Buyer expends in connection with a possible faulty/defective unit(s) including, but not limited to Locksmith fees, diagnostic fees, rental car fees, storage fees, dealership fees, third party reprogramming fees, etc. This transaction shall be deemed to have been made in the State of New York and the validity, interpretation and performance shall be governed by NY. Exclusive jurisdiction and venue over any disputes arising out of or in connection with this transaction shall be brought in Nassau County, NY. After one claim, the warranty is exhausted. Buyer hereby understands, acknowledges, agrees and accepts all of the terms set forth herein upon purchase and that the terms set forth herein shall be controlling.

FAQ

q: What is a Vehicle Identification Number (VIN)?

(Video) DODGE JOURNEY ECU ENGINE COMPUTER REMOVAL REPLACEMENT | FIAT FREEMONT

The vehicle identification number (VIN) refers to a unique code that is given to each automobile. The VIN acts as the vehicle's fingerprint, as no two vehicles have the same number. A VIN is composed of 17 characters (digits and capital letters) that act as a unique identifier for the vehicle. Each character is used to reference the vehicle's unique features, specifications and manufacturer. VIN numbers can be used to track recalls, registrations, warranty claims, thefts and insurance coverage. In our case, the VIN is used to identify the correct module for a particular vehicle.

q: What does "Plug & Play" mean?

Plug & Play or Plug ‘N Drive refers to all control modules that don’t require additional programming. Most units before 1996 (OBD I) are referred to as plug-n-play. All of our Chrysler, Dodge, Plymouth & Jeep units are sold as Plug & Play.

q: What does "Programmed & Updated" mean?

This term refers to the programming process our mechanics perform on all specified control modules. During this process the vehicles replacement engine control module is VIN Programmed and flashed with the most recent manufacturer updates. These updates can help improve the performance and fuel economy of the vehicle.

q: How much is shipping?

(Video) How to replace or fix a car computer PCM connector. Dodge Grand Caravan Chrysler Town and Country.

Flagship One offers free shipping throughout the USA. There is a 1-3 day handling time after an order is place. We use USPS Priority shipping to deliver all of our modules. This usually takes 1-3 business days on average and most of our modules are delivered to the customer in less then 5 business days. In some cases we can expedite the shipping and will inform you if that is a possibility.

q: Where can I locate my VIN?

You can find the VIN (17 digit identification number) engraved at the bottom corner of the drivers side windshield or inside the drivers door. It can also be found on the title, registration or insurance card of the vehicle.

q: What does an Engine Computer do?

The Engine Computer (ECM) will adapt to your own driving patterns and it can also monitor and regulate all the essential functions in a vehicle as conditions change. The engine computer is also responsible for making sure that all the modules are communicating smoothly and seamlessly.

q: Can I replace an ECM myself?

(Video) Top signs your Car Computer going bad. ECM ECU PCM TCM TIPM U0100. How to fix a HEMI car that stalls

The engine control module is easy to replace and relatively simple for you to do it on your own. Nevertheless an ECM can be costly, so you need to make sure you have the right part number plus the required software updates to ensure a smooth transition.

q: What causes an ECU to fail?

The engine control module is prone to both external and internal threats that can cause it to not work as expected. Below is a list of the most common ones:

  • Constant engine vibrations
  • An unexpected short circuit
  • Excessive Temperature
  • Natural Threats such as corrosion
  • Irregular voltage

q: What are the signs of a bad car computer?

Since the engine computer controls a lot of the major functions in a car it can be hard to pinpoint exactly what is causing your engine control module to malfunction but there are some common signs that can help you diagnose a faulty powertrain control module such as:

  • Engine stalling and misfiring
  • Loss of ignition pulse
  • Check engine warning light
  • Loss of acceleration
  • Car failing to start

FAQs

How long does it take to reprogram PCM? ›

The reprogramming procedure usually takes 30-40 minutes. 9. When the software has finished loading, it will note that programming is complete. The data is then transferred to the PCM's memory chip.

Can you reprogram your own ECM? ›

Reprogramming your ECM is necessary for keeping your vehicle control software up to date. Much like the operating system on your home computer, improvements in software are often made by your car's manufacturer. The software can be updated simply by downloading and installing the latest version.

What happens if ECM is not programmed? ›

If the ECM fails completely, it will leave the vehicle without engine management control, and will not start or run as a result. The engine may still crank, but it will not be able to start without the vital inputs from the computer.

Why would a PCM need to be reprogrammed? ›

PCM Reprogramming or reflashing is essentially a software upgrade and may be required to resolve a hot or cold starting issue, idle roughness, stalling, or an emissions failure.

How do you recalibrate PCM? ›

PCM Fix
  1. Press and hold the PCM info button for approximately 10 seconds until the PCM reboots.
  2. Immediately select the following from the PCM CAR > OPTION > Set PCM System > Reset PCM > Vehicle Handover > Yes > Yes.

How do I get my ECU to relearn? ›

How do you reset a car's ECU?
  1. Step 1: Drive your car for about 15 minutes until it heats to its normal working temperature.
  2. Step 2: Pop the hood and remove the negative lead from your car battery. ...
  3. Step 3: Let the car sit for at least five minutes.
  4. Step 4: Press and hold the break for at least 20 seconds.

Do I need to reprogram the ECM? ›

ECM Programming is Essential

In fact, if you replace the ECM on a vehicle model year '96 or newer and don't flash or program it, then your vehicle won't start. Most electronic car modules have a warning on them about reflashing before installation.

Is the ECM and PCM the same thing? ›

Most people, including automobile technicians, confuse the two for each other. The main difference between the two is that the ECM controls specific parts of the engine, regulating and sending commands. While the PCM is used in newer models to control almost all engine functions.

Can you tune a stock ECM? ›

If you are just wanting to implement some slight modifications like exhaust and air intake, then you will most likely be able to tune and program your existing stock ECM to meet your needs.

What causes ECM not to communicate? ›

In some ECUs, the crankshaft position, camshaft position and maybe the MAP sensor will use the same five-volt source. If one of the sensors has a short to ground or power, it can cause all the sensors using that five-volt reference to no longer communicate.

What is the most common failure of an ECM? ›

The most common source of ECM failure is in one of the wiring harnesses. If the wires to the transmission or fuel injectors become corroded, they can lose conductivity, leading to a failure. Fortunately, these issues can usually be resolved by replacing the corroded wires.

How do I know if my ECM module is bad? ›

What are the symptoms of a bad engine control module?
  1. Erratic engine behaviour. One of the symptoms indicating that your ECM is not working properly is engine stalling or misfiring. ...
  2. Inability to start the vehicle. ...
  3. Poor engine performance. ...
  4. Inefficient fuel economy. ...
  5. Warning light. ...
  6. Engine shuts off.
23 Dec 2021

How do I know if my PCM needs to be replaced? ›

7 Common PCM Failure Symptoms
  1. Your 'Check Engine' Light is On. ...
  2. Your Car Won't Start or Starts Roughly. ...
  3. Sudden Loss of Gas Mileage. ...
  4. You Failed Your Emissions Test. ...
  5. Your Engine Stutters or Stalls. ...
  6. Erratic or Random Shifting. ...
  7. You're Receiving a PCM-Related Error Code. ...
  8. What to Do If You Experience PCM Failure Symptoms.
23 Aug 2019

What does the PCM fuse control? ›

It controls all the relays and fuses of a car. The PCM power relay or ECM power relay work as a switch and transfer power to the ECM. However, if the ignition key turns off, the switches within the PCM power relay will not receive battery power. As a result, your vehicle will not operate properly.

Which method can be used to reprogram a PCM? ›

Reprogramming a powertrain control module​ (PCM) can be done by downloading new calibration files from a personal computer​ (PC) onto the​ PCM's memory.

Does touching the battery cables together to reset computer? ›

See all 2 photos Connecting the positive and negative battery cables together for approximately 5 minutes will drain all of the capacitors in the computers and forces them to cold reboot. This is a very common fix for communication problems.

Will disconnecting battery reset PCM? ›

On some older cars, disconnecting the battery will reset the system but in most new cars it does nothing, except potentially reset the clock and radio station presets.

How can you confirm PCM function? ›

You need to check the sensors that are connected to your PCM, as well as the wires that connect them. If you're seeing a PCM code – or two, or three – it can really help you narrow in on which sensors or wires are faulty. Perform a visual inspection of these wires, as well as checking them with a multimeter.

How do I manually program my ECU? ›

How do you manually program a Toyota ECU?
  1. First, locate the ECU plug/connector. ...
  2. Take a paperclip (or other sturdy but flexible wire) and bend it into a U shape.
  3. Stick one end of the wire in pin slot 4, and the other end in pin slot 13.
  4. Leave the paperclip inserted, and start the car.
  5. Let the car run for 30 minutes.
25 Apr 2022

How many miles do you have to drive to reset ECU? ›

Here's something you probably don't know: after clearing the car's computer you will need to drive for about 50 to 100 miles. As you drive your car the computer will monitor all the sensors and register the results.

Are you supposed to reset ECU after intake install? ›

ECU reset is recommended for many cars, like Nissan, after doing any modifications.

Can I replace my ECU with a used one? ›

If you mean can a bad ECU be replaced with a used one from a similar vehicle, yes. But it will need to be programmed which requires an interface device, a laptop and access to the manufacturer's website. Most independent shops won't be able to do this so a trip to a dealer is required.

Can you swap PCM? ›

Factory PCMs can indeed be flashed, but only to restore them to factory settings in the event that they've become corrected. Beyond that, if you want to change your vehicle's gear shift ratio, you'll need to buy a new PCM.

How much does it cost to program a ECM? ›

If the engine control module just needs to be tested, analyzed, and reprogrammed, it should cost you between $150 and $300. As with buying new, if you have someone else install your replacement remanufactured ECM, you could be looking at additional hundreds of dollars of labor costs.

What is the PCM code for ECM? ›

Code P0606 is triggered when there is a fault found in the processor internal to the Engine Control Module (ECM)/Powertrain Control Module (PCM). Based on your manufacturer, it will either be an ECM or PCM.

What's the difference between a ECU and a ECM? ›

What Do ECM and ECU Stand For? ECM stands for Engine Control Module, and ECU is short for Engine Control Unit. These two acronyms represent the same component and are used interchangeably.

What sensors are connected to ECM? ›

The ECM usually monitors and regulates the throttle position sensor, which tells the engine how much air and fuel to mix to make power; the coolant temperature sensor, which lets the engine know if it's running too hot (and alerts the driver, via the instrument panel light); the voltage regulator, which tracks and ...

Can I do ECU tuning myself? ›

Tuners didn't take long to figure out how to squeeze more power from even a basic engine with just a little code. Nice! Installing a preset car tune, also known as remapping the ECU, is the most effective and easiest tune an owner can do themselves.

Can ECU tuning increase horsepower? ›

Modern engine tuning can allow you to get better mileage than ever before by chip tuning your ECU. Your engine can also get an extra boost in horsepower and a better torque through ECU modifications. Chip tuning allows you to override the factory settings of your engine to improve the performance of your car.

Can you flash an ECU back to stock? ›

With just a laptop and a cheetah cable, we can assist you in reverting the software changes back to when your car was stock. Please note this is for engine (ECU) flash back to stock. If you also have a transmission tune you'd like changed back to stock, we also offer a bundle discount below.

What causes blown ECM fuse? ›

If the ECM fuse keeps blowing, then there is a definite electrical short. Most of the time the short is in the ECM, but it may have a short in the wiring going to it. I usually isolate it by going through the wiring schematic and disconnecting areas of the circuit until I find the short.

What happens when ECM fuse blows? ›

On a newer model car the ECU/ECM controls everything ignition related AT LEAST. Timing, ignition, air. When the fuse blows, the engine control unit/module loses power and is unable to control the ignition process, the throttle (drive by wire) shuts and fuel ceases to be commanded to move.

Can AutoZone test my ECM? ›

AutoZone offers Loan-A-Tool, Oil Recycling, Charging System Testing, Battery Charging, ECM Testing, Battery Testing, and Check Engine Light Fix Finder, all for free. Once you've received the results of your test you can decide whether or not you should replace your battery or have your car serviced.

What can damage ECU? ›

One of the main causes is a short circuit in the wiring or in components, which can cause them to burn out. This short circuit is often caused by external influences, such as the wrong start of the car.

What problems can a faulty ECU cause? ›

For example, poor performance or unexplained drops in fuel economy or efficiency are often related to onboard car computer problems, or faulty ECU issues. A damaged ECU can cause problems when shifting gears in an automatic transmission, or cause sudden jerking or stopping that's similar to transmission problems.

What happens if the ECM relay is bad? ›

If the ECM or it's relay fail, the entire engine management system will be left without power and will not function as a result. A bad relay may cause the vehicle to crank, but not start, or sometimes not even crank at all.

How much does a PCM reset cost? ›

The pricing for this can vary depending on the amount of work to fix it and the parts needed. Generally, this can be between $80 and $180.

What components does the PCM control? ›

The PCM controls ignition timing, fuel delivery, valve timing in engines with Variable Valve Timing), emissions functions, turbo boost pressure in turbocharged engines, idle speed, throttle position and cruise control.

What causes lost communication with ECM PCM? ›

The U0100 code shows up when there is a loss of communication between the ECM or the PCM. This could be due to a loose connection or broken wires, but it could also indicate a problem with the PCM computer itself.

How much does it cost to reset a PCM? ›

The pricing for this can vary depending on the amount of work to fix it and the parts needed. Generally, this can be between $80 and $180.

How much does it cost to get an ECU reprogrammed? ›

These typically cost somewhere in the ballpark of $200-$400. Again, the actual cost of repairing and replacing the ECM will depend on the make and model of your car. If the engine control module just needs to be tested, analyzed, and reprogrammed, it should cost you between $150 and $300.

What are the signs of a failing PCM? ›

7 Common PCM Failure Symptoms
  • Your 'Check Engine' Light is On. ...
  • Your Car Won't Start or Starts Roughly. ...
  • Sudden Loss of Gas Mileage. ...
  • You Failed Your Emissions Test. ...
  • Your Engine Stutters or Stalls. ...
  • Erratic or Random Shifting. ...
  • You're Receiving a PCM-Related Error Code. ...
  • What to Do If You Experience PCM Failure Symptoms.
23 Aug 2019

How much does it cost to get a ECM reprogrammed? ›

A remanufactured ECM can cost you anywhere from $200-$400.

If you choose to go this route, make sure the part comes with a factory warranty or is 100% certified. If the ECM just has to be reprogrammed and/or analyzed, it can cost $150 to $300.

Does an ECM need to be programmed when replaced? ›

ECM Programming is Essential

We can't stress the importance of programming when it comes to any new powertrain or electronic module. In fact, if you replace the ECM on a vehicle model year '96 or newer and don't flash or program it, then your vehicle won't start.

Does disconnecting the ECU reset it? ›

A. It depends on the car's age and type of ECU used. On some older cars, disconnecting the battery will reset the system but in most new cars it does nothing, except potentially reset the clock and radio station presets.

Can I replace my ECU myself? ›

Whilst you can adjust and replace the ECU in a vehicle that is predates 2001, you may have difficulty with newer cars. Many of these have complex computer systems and you will have to take them into an authorised dealer to have reconfiguration work performed under the hood.

Is PCM and ECM the same thing? ›

The terms PCM (Powertrain Control Module), ECU (Engine Control Unit) and ECM (Engine Control Module) can sometimes be used as interchangeable generic phrases for the same thing - a control unit for the engine/transmission system.

Videos

1. How to Program Engine Computer ECU Dodge Charger Dodge Magnum Chrysler 300
(Auto Repair Guys)
2. How to reflash a Chrysler PCM
(Justin Miller)
3. How To Remove The PCM Computer From Your Dodge Charger
(Riding In Style)
4. Tips on the Dodge Chrysler ECM
(JamieJones TheCarMan)
5. Bad Engine Control Module Symptoms #FlagshipOne #EngineControlModule
(Flagship One, Inc.)
6. Engine Control Module (ECM) Battery Fuse Replacement
(2CarPros)
Top Articles
Latest Posts
Article information

Author: Sen. Ignacio Ratke

Last Updated: 03/04/2023

Views: 5534

Rating: 4.6 / 5 (56 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Sen. Ignacio Ratke

Birthday: 1999-05-27

Address: Apt. 171 8116 Bailey Via, Roberthaven, GA 58289

Phone: +2585395768220

Job: Lead Liaison

Hobby: Lockpicking, LARPing, Lego building, Lapidary, Macrame, Book restoration, Bodybuilding

Introduction: My name is Sen. Ignacio Ratke, I am a adventurous, zealous, outstanding, agreeable, precious, excited, gifted person who loves writing and wants to share my knowledge and understanding with you.